Filter
Top Products
Chapter 3. Quick Setup
7. Labeling Camera
Page 48
7. Labeling Camera
Sometime camera location may be identified easier by giving logical name to the camera. Here are steps
to give logical name label instead of having default label.
Step 1. Select “Camera” item on upper main category and select CAMERA TITLE
Figure 50 Camera Title Menu
Here you may choose camera(s) that you want to give logical name and repeat to other camera(s) as
needed. In this example we have chosen Camera 1 marked Ch1 and will change the label to door1.
Step 2. Click Camera Number to change then use the on screen key pad to change the label as shown
below. When done giving name select and choose OK to end typing.
Step 3. Exit the menu and select YES to apply the setting