Filter
Top Products
Menu Item Description
Memory Refresh Rate Sets the memory refresh rate to either 1x or 2x. By default, the Memory
Refresh Rate option is set to 1x.
Uncore Frequency Selects the Processor Uncore Frequency.
Dynamic mode allows the processor to optimize power resources across
the cores and uncore during runtime. The optimization of the uncore
frequency to either save power or optimize performance is influenced by
the setting of the Energy Efficiency Policy.
Energy Efficient Policy Enables you to select the Energy Efficient Policy.
The CPU uses the setting to manipulate the internal behavior of the
processor and determines whether to target higher performance or
better power savings.
Number of Turbo Boot
Enabled Cores for Processor
1
NOTE: If there are two processors installed in the system, you see an
entry for Number of Turbo Boost Enabled Cores for Processor 2.
Controls the number of turbo boost enabled cores for processor 1. By
default, the maximum number of cores is enabled.
Monitor/Mwait Enables the Monitor/Mwait instructions in the processor. By default, the
Monitor/Mwait option is set to Enabled for all system profiles, except
Custom.
NOTE: This option can be disabled only if the C States option in
Custom mode is set to disabled.
NOTE: When C States set to Enabled in Custom mode, changing
the Monitor/Mwait setting does not impact system power/
performance.
System Security Settings screen
The System Security screen allows you to perform specific functions such as setting the system
password, setup password, and disabling the power button.
To view the System Security Settings in the System Setup Main Menu screen, click System BIOS →
System Security Settings.
Menu Item Description
Intel AES-NI Improves the speed of applications by performing encryption and
decryption using the Advanced Encryption Standard Instruction Set and is
set to Enabled by default.
System Password Allows you to set the system password. This option is set to Enabled by
default and is read-only if the password jumper is not installed in the
system.
Setup Password Allows you to set the setup password. This option is read-only if the
password jumper is not installed in the system.
Password Status Allows you to lock the system password. By default, the Password Status
option is set to Unlocked.
TPM Security
NOTE: The TPM menu is available only when the TPM module is
installed.
26