Filter
Top Products
2. Follow the procedure listed in Before working inside your system.
3. Remove the cooling shroud.
Steps
1. Locate the appropriate memory module socket(s).
2. To release the memory module from the socket, simultaneously press the ejectors on both ends of
the memory module socket.
CAUTION: Handle each memory module only by the card edges, making sure not to touch
the middle of the memory module or metallic contacts.
3. Remove the memory module from the socket.
Figure 9. Removing the memory module
1. memory module 2. memory module socket
3. memory module ejector (2)
Next steps
1. If you are removing the memory module permanently, install a memory-module blank.
2. Install the memory module.
3. Install the cooling shroud.
4. Follow the procedure listed in After working inside your system.
Related Links
Removing the cooling shroud
Installing memory modules
Installing the cooling shroud
45