Filter
Top Products
Steps
1. Press the release button to open the SSD carrier handle.
2. Slide the SSD carrier into the drive bay and push it until the handle makes contact with the sled.
3. Rotate the carrier handle to the closed position while pushing the carrier into the slot until it locks
into place.
The status LED indicator displays a steady green light if the drive is installed correctly. The drive
carrier LED green indicator flashes as the drive rebuilds.
Next steps
Follow the procedure listed in After working inside your system.
Related Links
Removing an SSD blank
Installing an SSD into an SSD carrier
Removing an SSD blank
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
CAUTION: To maintain proper system cooling, all empty SSD slots must have a SSD blank
installed.
Ensure that you read the Safety instructions.
Steps
Press the release latch and slide the SSD blank out of the SSD slot.
73