Filter
Top Products
Internal Dual SD Module (IDSDM) card
The IDSDM card provides one SD card slot, one vFlash card slot and a shared USB interface for the
embedded hypervisor. This card offers the following features:
• Single card operation — single card operation is supported, but without redundancy.
• Dual card operation — dual card operation is supported and can be configured with redundancy.
NOTE: When the Redundancy option is set to Mirror Mode in the Integrated Devices screen of the
System Setup, the information is replicated from one SD card to another.
Removing an internal SD card
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
1. Ensure that you read the Safety instructions.
2. Follow the procedure listed in Before working inside your system.
3. Enter System Setup and ensure that the Internal SD Card Port is enabled.
NOTE: When an SD card failure occurs, on the next reboot, the system displays a message
indicating the failure.
Steps
1. Locate the SD card slot on the internal dual SD module (IDSDM) card.
2. Press the card to release it from the slot and remove the card.
51