Dish Network Solo 508 Satellite TV System User Manual


 
Page 65
Use the DishDVR Features
Page 65
•PressthePLAY button to play ba ck or go on with a paused play
back. Also, press this button to switch from fast forward or
reverse ba ck to normal play back.
•PresstheSKIP BACK button to skip ba ck about ten se conds in
the event. Press this button again to skip back again.
•PressthePAUSE button and then press the SKIP BACK
button to reverse the recording one frame at a time.
•PresstheSKIP AHEAD button to skip ahead about 30 seconds
in the e vent. Press this button again to skip ahead again.
•PressthePAUSE button and then press the SKIP AHEAD
button to advance the recording one frame at a time.
•PresstheSTOP buttontostopplayback.
Play Back a Recorded Event and Record Another Event
1. Set up the r eceiver to m ake an on-demand recording.
Note:YoucanpresstheRECORD button or you can use a ny kind
of event timer except a VCR event timer.
2. Pre ss the DV R button. This opens the
DVR Recorded
Events
menu.
3. Select an event on the
DishDVR Recorded Events menu (not the
one you’re recording). This opens an information menu for that
event.
4. Select the
Start, St art Over,orResume optiontoplaybackthe
event.
Tip: With the
DishDVR
receiver, you
can even
watch one
re corded
event while
recording
another at the
same tim e!