Filter
Top Products
Digital Video Recorder
37
You can assign IDs to each camera by highlighting the box under the ID heading and pressing the button.
Change the number by highlighting it and using the Up and Down arrow buttons to increase and decrease
the number. The PTZ ID number can be set from 0 to 256.
Highlight the Setup… box and press the button. The Port Setup window appears.
You can save your PTZ changes by highlighting Save and pressing the button. Selecting Cancel exits
the screen without saving the changes.
DEVICE SETUP
Figure 28 ─ Device Menu.
You can configure the audio, alarm, display and remote control devices connected to the DVR.
Select your camera from the list and press the button. You will need to
connect the camera to the RS232 or RS485 connector on the back of the DVR
following the camera manufacturer’s instructions.
Configure the port’s setting based on the PTZ camera manufacturer’s instructions.