Filter
Top Products
Digital Video Recorder
41
Audio ─ The icon
displays on each camera screen for which the DVR can play live audio.
PTZ ─ The icon
displays on each PTZ camera screen.
Text-In ─ The text input strings display on the screen. You can adjust the Display Dwell time (sec.) for the
text input strings displayed on the screen.
You can adjust the transparency of the setup screens by highlighting Transparency and using the Left and
Right arrow buttons.
Highlighting OSD Margin… and pressing the button displays how
OSD text will be displayed on the monitor.
You can adjust the horizontal and vertical margins so that text and icons
will not be hidden beyond the edges of the monitor.
You can save your OSD settings by highlighting Save and pressing the button. Selecting Cancel exits
the screen without saving the changes.
Main Monitor Settings (DISPLAY Main Monitor Tab)
Figure 34 ─ Main Monitor setup screen.
Highlight the box beside Mode and press the button. You can select between Full Sequence and Cameo
Sequence.
Pressing the Sequence button causes the DVR to sequence cameras, and the DVR can sequence cameras
in two modes: “Full” and “Cameo”. In the Full mode, the DVR sequences through the cameras and displays
them full screen. In the Cameo mode, the bottom right window in a multi-screen format sequences through
the cameras.
NOTE: Any cameras that are Off, have lost video or are set to Covert (unless the user has authority
to view covert cameras) will be excluded from the Cameo sequence.
You can define the screen layout in a variety of formats and set the DVR to sequence through the different
screen layouts (pages) so that all the cameras will be displayed. You can also set up the DVR to display
one camera or a group of cameras all the time while cycling through the remaining cameras in a “cameo”
window. This can be done with one camera displayed full screen while displaying the cameo window as a
PIP (picture in picture), or displaying the cameras in a grid pattern with the bottom right window as the cameo.
NOTE: Sequence cannot be used in the 4x4 display mode of the 16-channel, and 3x3 mode of the
8-channel DVR.
Highlight the box beside Interval and press the button. You can adjust the display dwell time for each
camera displayed on the main monitor.