Mitsubishi Electronics DX-TL8U DVR User Manual


 
User’s Manual
76
Appendix I Specifications
VIDEO
Signal Format NTSC or PAL (Auto Detect)
Video Input Composite: 8 or 16 looping inputs, 1 Vp-p, auto-terminating, 75 Ohms
Monitor Outputs
Composite: 1 BNC, 1 Vp-p, 75 Ohms
Spot: 1 BNC, 1 Vp-p, 75 Ohms
VGA: 1
Video Resolution
Composite: 720x480 (NTSC), 720x576 (PAL)
VGA: 800x600 @ 60Hz
Playback/Record Speed
(images per second)
120/120ips (NTSC), 100/100ips (PAL)
INPUTS/OUTPUTS
Alarm Input
8 or 16 terminal, programmable as NC or NO, 2.4V (NC) or 0.3V (NO)
threshold, 3.3VDC
Alarm Output
1 relay output, terminal blocks, programmable as NC or NO, 2A@125VAC,
1A@30VDC
Alarm Reset Input 1 TTL, terminal block
Internal Buzzer 80dB at 10cm
Network Connectivity 10/100 Mbps Ethernet (RJ-45)
Audio Input RCA Input: 4, Line In
Audio Output RCA Output: 1, Line Out
Text Input POS Interface, ATM Interface
CONNECTORS
Video Input Composite: 8 or 16 BNC
Video Loop Composite: 8 or 16 BNC (Auto Terminating)
Monitor Output
Composite: 1 BNC
VGA: 1 VGA
Spot (Composite): 1 BNC
Audio In 4 RCA connector
Audio Out 1 RCA connector
Alarm Input/Output Terminal blocks
Ethernet Port RJ-45
RS232C Serial Port DB9 (P)
RS485 Serial Port Two-connector terminal block
USB Port 2 (USB 2.0)
STORAGE
Primary Storage SATA hard disk drive (up to 2)
Secondary Storage*
Built-in DVD RW drive
USB hard disk drive or flash drive
* When installing an internal DVD RW drive, connect the SATA I/O cable to the SATA3 socket.
Specifications are subject to change without notice.