Filter
Top Products
Chapter 7 - Remote Configuration and Management
RF300E/RF310E 105
To select an option, enter the number of the option and hit the Enter key. For example, to select the
Dial-Out option, type 1 <Enter>. For details on a parameter, refer to the associated on-line Help.
Dial-Out
The Dial-out option (Option 1) on the RASFinder Management Menu enables a Telnet user to
configure one of the WAN ports for a dial-out session. The default configuration of 115200 bps, 8N1
can be used for the dial-out session, or the user can specify each parameter for the port (e.g., the
baud rate, the number of data bits, parity, or the number of stop bits). When the connection is
established, anything entered on the keyboard is immediately presented to the selected WAN port.
When the dial-out session is over, the WAN port reverts to its original configuration.
RASFinder Management
The RASFinder Management option (Option 2) on the RASFinder Management Menu enables a
Telnet user to view router statistics or system information; another option enables the remote user to
Reset the router.
RASFinder Configuration
The RASFinder Configuration option (Option 3) on the RASFinder Management Menu enables a
Telnet user to view and change parameters on the protocol stacks, view or change bridge
information, select PPP or SLIP, select a WAN port, or enable/disable the supported servers
(applications).
WAN Device Configuration
The WAN Device Configuration option (Option 4 on the RASFinder Management Menu) allows a
remote user (a Telnet client) to put any port in WANTalk mode.
Remote User Database
The Remote User Database option (Option 5 on the RASFinder Management Menu) allows a remote
user to add user information such as Name and Password, callback information, and which protocol
stacks to enable or disable.