Filter
Top Products
RASFinder RF300E/RF310E User Guide
RF300E/RF310E8
Front Panel
The front panel has four groups of LEDs that provide the status of the LAN connection and link
activity. Two other LEDs indicate the general status of the RASFinder. The Ethernet LEDs display the
activity of the LAN in whether the RASFinder is connected to the LAN, transmitting or receiving
packets, and if a collision is in progress. The Link LEDs display the status of the three links that can
be connected to the RASFinder and show whether a link is ready to transmit or receive serial data.
The last two LEDs indicate whether the self test passed or failed and if the power ON/OFF switch on
the back of the RASFinder is set to ON.
Figure 1-2. Front Panel
LAN
LD TBD.
TX Transmit Data indicator blinks when packets are being transmitted to the local area network.
LK Link indicator lights indicating that the RASFinder is connected to the local area network.
RX Receive Data indicator blinks when packets are being received from the local area network.
BRI x
RD Receive Data indicator blinks when the link is receiving data.
TD Transmit Data indicator blinks when the link is transmitting data.
CD Carrier Detect indicator lights when the link detects a carrier signal.
TR Terminal Ready indicator blinks when the link is ready to transfer data.
BOOT The BOOT indicator lights for 3 minutes when power is applied to the RASFinder; if it
remains on for over 3 minutes, it indicates that a boot failure has occurred.
PWR The power indicator lights when the On/Off switch is in the up (1) position.