Filter
Top Products
Chapter 4 - RASFinder Software
RF300E/RF310E 39
RAS application using Radius on an Ethernet IP network, you would disable the IPX protocol and then
change the default LAN IP address and mask to the unique IP addressing scheme for your network.
The address assigned to the Ethernet port of the RASFinder can be any address that is recognizable
by your network’s backbone.
After you enter your LAN IP address information and six sequential WAN addresses have been
automatically placed in the Remote address for WAN 1 thru WAN 6 fields, ensure that the Enable IP
Routing on each WAN port is checked. This activates the WAN ports to receive calls from the remote
users. At this point, the software will be downloaded to the RASFinder and then you will need to go in
through the main menu to set up your ISDN connection to your Public Switched Telephone Network
(PSTN) and Radius security services.
To establish your ISDN connection with your local PSTN (either the North American version or the
European version), you may have to enter some ISDN parameters, e.g., switch type used by the
PSTN, SPIDs and Directory Numbers for North America or ISDNs and sub addresses for European
and the Rest of the World (ROW). During the provisioning of the ISDN connection with your local
PSTN, the local telephone company established some ISDN parameters for your local connection. A
space is provided in Before You Start Loading your Software to document these parameters. Now, in
order to load this informtion into your RASFinder, you need to bring up the Main Menu and click on
the WAN button.
From the WAN Port Setup dialog box, click on the Advanced tab to bring up the WAN Port Setup
dialog box with the ISDN TA Control group highlighting wan 1. To establish your ISDN parameters,
click on the Edit button and the ISDN Parameter Configuration dialog box is displayed.