Panasonic AG-DV2000P VCR User Manual


 
16
17
Infra-red Transmitter
OK
To start Manual editing and to store the selection on the
SET UP or EDIT MENU screen.
18
VIDEO INSERT
For the Video Insert function and the AV Insert function.
28 INDEX/PHOTO
19
AUDIO INSERT
For the Audio Insert function and the AV Insert function.
20
AUDIO DUB
For the Audio Dubbing function or the Audio Mixing
function.
21
JOG/SHUTTLE
To switch to the Jog/Shuttle mode. When the button is
pressed, it lights and the VCR enters the Jog/Shuttle
mode.
In the stop mode: Still picture (Jog/Shuttle mode).
During playback: Still picture (Jog/Shuttle mode).
22
INPUT SELECT
To select the A1, A2 or DV IN external recording source.
23
RESET
To reset the tape counter (elapsed time) to “0:00.00”.
The tape counter is automatically reset to “0:00.00”.
when a video cassette is inserted.
It is not possible to reset the Time code to
“0h00m00s00f” using RESET.
24 ZERO STOP
For the zero stop function.
25 PLAYER
To operate the playback unit.
26 SEARCH SELECT
To search for a recorded program using the index/
photoshot index search.
27 RECORDER
To operate the recording VCR.
For the index/photoshot index search function.
29 STEREO SELECT
To select the audio track (STEREO1 audio and/or
STEREO2 audio) on a tape which was recorded in the
12bit audio mode. During playback, each time the button
is pressed, the sound changes as follows:
STEREO1
STEREO2
STEREO1
STEREO2
(MIX)
The audio track cannot be selected during the
playback of a tape recorded in the 16bit audio mode.
When INPUT SELECT is set to DV IN, the audio track
can be selected by STEREO SELECT at any time: it
does not have to be during playback.
30 VCR1/2/3
To select the remote control mode. The selected mode
appears on the remote controller display.
VCR1 :
Set this position on both the VCR and
remote controller for normal use with one
VCR.
VCR2:
Set this position when using two
Panasonic VCRs.
VCR3:
Set this position when using three
Panasonic VCRs.
Note:
While in the editing mode the VCR’s Time code or tape
counter display cannot be changed.
10