Filter
Top Products
One-Touch-Edit
AV-IN Color Level
1
Press
SET UP.
1
Press
SET UP.
2
Select One-Touch-Edit.
On Screen Display
2
Select
AV-IN Color Level.
3
Select
OFF
or
ON.
3
Select
SOURCE
or
ADJUST.
OFF:
Select this whenever you are performing any
SOURCE:
Normally set this position.
editing function other than One-Touch-Edit.
ADJUST:
To adjust the color level of the input
ON:
Select this in order to perform One-Touch-Edit.
external recording source connected to A1
or A2.
One-Touch-Edit is possible only when
EDIT CONTROL
is set to either DV or EDIT, and EDIT MODE is set to
RECORDER.
If you select
ADJUST
and then press
OK,
the AV-IN Color
Level screen is displayed.
4
Press
EXIT
to exit the On Screen Display.
4
Adjust the color level using
Press
to make the color lighter
Press
to make the color darker
The setting can be adjusted over a range of ±20.
5
Press
SET UP,
and then press
EXIT
to exit the On Screen
Display.
Notes:
If
INPUT SELECT
is set to DV IN, the Audio Mode,
AV-IN Color Level, and AV-IN Hue Level cannot be selected
on SET UP screen.
The AV-IN Color Level and AV-IN Hue Level can be selected
in following cases:
INPUT SELECT is set to A1 or A2;
When the VCR is in stop mode
31