Filter
Top Products
Notes:
Although Assemble editing can be performed in LP mode,
Insert, Audio Dubbing, and Audio Mixing cannot be
performed with a tape recorded in LP mode. It is necessary
to first copy the tape in SP mode.
In order to ensure that the editing operation is performed
properly, the editing points should be set at least 20
seconds after the beginning of the tape.
When using the editing controller for remote control:
In order to conserve battery power, JOG/SHUTTLE turns
off after one minute.
If JOG/SHUTTLE turns off after the edit start point has
been set on the recording unit (step 2), it is necessary to
press JOG/SHUTTLE again (so that it is lit) before
searching for the edit start point on the playback unit.
If JOG/SHUTTLE turns off after the edit start point has
been determined on the playback unit (step 4), it is
necessary to press JOG/SHUTTLE twice in order to start
editing.
37