Filter
Top Products
Connecting an S-VHS (VHS) Video
Equipment with an Edit Socket
Example for connecting an S-VHS (VHS) Video Equipment with an Edit socket as the playback unit, when controlling the
playback unit through the recording VCR (this unit).
Refer to the diagram below and connect the cables
required for the desired editing function.
Notes:
Before connecting any cables, first make sure that the
power for both units is off.
Insert a recorded cassette into the playback unit, and a
cassette with the closed record prevention tab into the VCR.
If the playback unit is connected to the recording unit via an
S-VIDEO cable, the video signal on the S-VIDEO cable
takes priority. If the playback unit does not have an S-
VIDEO socket do not connect the S-VIDEO cable to this
unit.
Read the operating instructions of the playback unit.
Do not change the EDIT CONTROL or EDIT MODE settings
while performing setting or editing operations at the SET UP
or EDIT MENU screens. Be sure to quit these screens
before changing these settings.
When using this VCR as the recording VCR, the On Screen
Display (date/time, Time Code) may scroll vertically when
still playback or slow playback are performed by the
playback VCR.
When using the BNC socket, use a BNC-PHONO
conversion adapter (sold separately).
28