Filter
Top Products
On Screen Display
Press RECORDER, and then press
JOG/SHUTTLE.
Notes:
The picture from the recording VCR appears on the
screen.
Search for the edit start point on the
recording VCR.
Select Start Copying.
Press
OK.
Editing begins.
Press EDIT MENU to stop editing.
Operation now returns to the screen which appears
in step 3. This makes it possible to continue with
editing or change the point at which editing is to
start.
Press
EXIT.
The On Screen Display disappears.
If a digital video tape is copied without connecting a DV
cable, the original sub code data (photoshot index signals,
recording date, etc.) is not copied.
Although Copying can be performed in LP mode, Insert and
Audio Dubbing cannot be performed with a tape recorded in
LP mode. It is necessary to first copy the tape in SP mode.
In order to ensure that the editing operation is performed
properly, the editing points should be set at least 20
seconds after the beginning of the tape.
The pause operation may be indicated on the display of the
playback unit even though the playback unit is actually
playing the tape in slow motion.
Up to ±1 second of slight deviation in the specified edit start
position can be corrected. See page 64 for Edit Timing
Adjustment.
43