Filter
Top Products
Program Assemble (continued)
Press RECORDER and JOG/
SHUTTLE.
The picture from the recording VCR appears on the
screen.
On Screen Display
Search for the edit start
point on the recording
VCR and press MARK IN.
Press
OK.
“OK: done”
is not displayed at the bottom
of the screen.
To check and
change programs:
Select Confirm/Change and then press OK.
To confirm, change, insert or erase editing programs,
see pages 60-61.
Programs cannot be inserted or erased through the
recording unit.
To continue setting programs:
1 Press EDIT MENU.
2 Press PLAYER.
3 Using
select the program number.
The program number changes each time these buttons
are pressed.
(Up to 40 programs can be set. 10 programs can be set
on one page; if this number is exceeded, the display
automatically changes to the next page.)
4 Repeat steps 4-6 and 9.
50