Filter
Top Products
To insert a new program between existing programs:
1 Select Insert a program, and then press OK.
The program list is displayed.
2 Select the program number where a program is to be
inserted, and then press OK.
The Insert a program screen is displayed.
3 Refer to the pages that describe the Program Editing
functions (on pages 48-59), and set the new program.
4 When setting is complete, press OK.
5 Press EDIT MENU.
To cancel a program:
1 Select Erase a program, and then press OK.
The program list is displayed.
2 Select the program number to be erased, and then press
OK.
3 Press EDIT MENU.
To cancel all editing programs:
1 Press EDIT MENU twice.
2 Select Program Editing, and then press OK.
3 Check that Erase all programs is selected and press
OK.
The Erase all programs screen is displayed.
4 Select YES, and then press OK.
The screen returns to the Program Editing menu.
After the message indicating that “All programs have
been erased.”
appears on the screen, operation returns
to the EDIT MENU screen.
5 Press EDIT MENU.
If the EDIT MENU screen is cancelled before the above
procedure is performed, the method for displaying the
Program Editing changes.
Press EDIT MENU so that the EDIT MENU screen is
displayed. Use to select Program Editing, and then press
OK.
Note:
Programs set in the recording unit for the Assemble editing
function cannot be inserted or erased.
61