Filter
Top Products
Editing when Not Using an Edit Cable
To connect a VCR or Movie Camera without an Edit Socket and use this unit as the Recording VCR.
Preparations
Complete necessary connections and settings.
See pages 24-33.
Connect the INPUT1 or AV2 on this unit to the playback
unit.
Set
INPUT SELECT
on this VCR.
A1:
Through the INPUT1 sockets.
A2:
Through the AV2 sockets.
If the playback unit has a DV terminal, connect to the DV IN/
OUT on this unit with a DV cable.
Operations
Using the controls on the playback unit,
search for the edit start point, and then
pause the playback.
Press JOG/SHUTTLE on this
unit, and check that the button is
lit.
Press the button for the editing mode on
this unit.
To copy the contents of the tape in the playback unit
as is: Press
REC.
To insert picture: Press
VIDEO INSERT.
To insert sound: Press
AUDIO INSERT.
To insert picture and sound: Press
VIDEO INSERT
and then press
AUDIO INSERT
(or vice versa).
To add new sound: Press
AUDIO DUB.
For Audio Mixing: Press
AUDIO DUB
and then press
MIXING EDIT on the front right panel.
The Audio Mixing procedure differs in part from
other editing operations. See page 40.
The indicator that corresponds to the selected
editing mode lights on the VCR display.
Indicators On the VCR Display
VIDEO INSERT
AUDIO INSERT
Search for the edit start point.
AV INSERT
AUDIO DUBBING
AUDIO MIXING
34