Filter
Top Products
Select Timing Adjust, and then press
OK.
Adjust the timing for the edit start point
by setting the amount of the
discrepancy for the
start-up time.
The setting is displayed in
frames (apporoximately 1/30 of a second) units.
Press
if the start point is too early;
press
if it is too late.
Each time the button is pressed, the tape moves
by 1 frame.
Corrections can be made in the range of ±30
frames.
Press
OK.
Adjust the timing for the edit end pont
in same way.
Press
OK.
Select Start Insert (Assemble or
Dubbing), and then press OK.
If the results of editing indicate that the
adjustment is inadequate, repeat steps 4-8.
Notes:
The procedure described on these pages is to be
performed after exiting the EDIT MENU screen. If this
procedure is performed after having executed Start
Editing or Review, start this procedure from step 4 on the
Video Insert (Assemble, Audio Insert, AV Insert or Audio
Dubbing) screen.
The adjusted frame unit is applied to all of the programs
that have been set at the moment when the adjustment is
made.
63