Panasonic AG-DV2000P VCR User Manual


 
Playback Unit
(S-VHS (VHS) Video
Equipment with an Edit socket)
Recording VCR
(this unit)
Turn the power on.
Turn the power on.
Set the unit so that it is ready to be
controlled.
Read the operating instructions of the playback
unit and make the necessary settings.
Set EDIT MODE to
RECORDER.
Set EDIT CONTROL to
EDIT.
Press INPUT SELECT so that A2 is
selected.
If the playback unit is connected to the external
input on the rear of this unit, select A1.
Connecting this unit as the Playback
VCR to an S-VHS (VHS) VCR
Follow the procedure described below.
Connect the edit cable to the EDIT socket on both the
playback VCR and the recording VCR.
Use AV cables to connect the output sockets on this
unit with the input sockets on the S-VHS (VHS) VCR.
Connect two monitors, one to this VCR and one to the
S-VHS (VHS) VCR, so that the screens from both
VCRs can both be seen.
Set
EDIT CONTROL
on this unit to
EDIT.
Set
EDIT MODE
on this unit to
PLAYER.
Press INPUT SELECT on this unit and select a
position to which a cable is not connected.
The Recording Unit
The Playback Unit
(this unit)
Make the necessary editing control settings for the S-
Note:
VHS (VHS) VCR. (Read the operating instructions of
Audio Insert and AV Insert are not possible in this
S-VHS (VHS) VCR.)
configuration.
29