Panasonic AJ-HD150FE VCR User Manual


 
– 113 –
(2) Commands relating to inquiries
<Notes>
As for the return (completion) message, [ACK] is first returned when data is received, and the execution message is
subsequently returned. It is only the execution message which is listed in this table.
In the case of commands not listed in the table, ER001 (invalid command) is returned after [ACK] has been returned.
VTR
operation
Send command
Return (completion)
message
Supplementary notes
[STX] QCD [ETX]CTL/TC
DATA
REQUEST
[STX] CD data [ETX]
This command is for inquiring about the counter
value.
[STX] QOP [ETX]STATUS
REQUEST
[STX] xxx [ETX]
data =
data = AJ-HD150
f w gh mm ss ff
f
w
gh
mm
ss
ff
= F
= S
=
CTL:
TC:
=
=
=
=
g =
h =
gh =
SP (20h):
– (2Dh):
0–9: hours
00–23: hours
00–59: minutes
00–59: seconds
00–29: frames (525 mode)
00–24: frames (625 mode)
for a plus display
for a minus display
CTL or TC is returned,
whichever corresponds
to the front display
mode.
This command is for inquiring about the VTR’s ope-
ration mode.
xxx = OEJ:
OFF:
OPL:
ORC:
ORW:
OSP:
SRS:
OBF:
OSF:
OSR:
OJG:
OSW:
EAE:
EON:
EPV:
ERV:
EJECT
FAST FORWARD
PLAY
REC
REWIND
STOP (including the STANDBY ON)
(IN/OUT) PREROLL
STANDBY OFF
SHTL FORWARD
SHTL REVERSE
JOG FORWARD/REVERSE
VAR FORWARD/REVERSE
AUTO EDIT
EDIT ON (MANUAL EDIT)
PREVIEW
REVIEW
[STX] QID [ETX]
ID (VTR No.)
REQUEST
[STX] data [ETX]
This command is for inquiring about the VTR used.
RS-232C interface