Filter
Top Products
– 20 –
Operations using the front panel bottom controls
Turn the search dial and select the item to be registered.
The cursor (¢) on the menu screen now moves.
∫Example of the menu displayed for registering setup menu items
∫Example of the menu displayed for registering VTR statuses
When registering setup menu items: At the position of the item to be registered,
select the PROG MENU button (1, 2, 3 or 4) in
which the information is to be registered, and
press it.
When registering VTR statuses: At the position of the item to be registered,
select the STATUS button (1, 2 or 3) in which
the information is to be registered, and press it.
The number of the button corresponding to the button that was pressed is now
displayed. When the same button is pressed again, the button number display is
released.
To register more items, repeat steps 3 and 4.
Press the SAVE/EXIT button.
The registered information is now saved in the memory. (When more than one item
has been registered, the information will be stored in sequence starting with the lowest
item number.)
To return the registered information to the state prior to registration, press the STOP
button.
ASSIGN-MENU BASIC
<USER> N0.000 - 1---
¢
000 P-ROLL TIME 1---
001 LOCAL ENA -2--
002 TAPE TIMER --3-
003 REMAIN SEL ----
004 SYNCHRONIZE ----
005 SUPER ----
006 DISPLAY SEL ----
007 CHARA H-POS ----
008 CHARA V-POS ----
ASSIGN-MENU
<STATUS> N0.000 - 1---
¢
000 REC FORMAT 1---
001 REF OUT -2--
002 PB FLD RATE --3-
003 REC FLD RATE ----
004 HD OUT ----
005 SD OUT ----
006 UFC ----
END ----
3
4
5
6