Filter
Top Products
– 77 –
Setup menus
USER menu
<INTERFACE> (continued)
Item Setting
No.
Superimposed
No.
Superimposed
Description
display display
211 LOCAL 50P 0000 OFF
0001 ON
212 MASTER 0000 IN/OUT
PORT 0001 OUT
The underline on the setting item denotes the initial setting.
This selects whether the PARALLEL (50P) connector is to
work when the REMOTE/LOCAL switch has been set to
LOCAL.
0: The connector does not work.
1: The connector works.
This selects the remote control connector for controlling the
slave machine when the unit is to be used as the master
machine for deck-to-deck operations.
0: The IN/OUT connector is used.
1: The OUT connector is used.
<Note>
This setting takes effect only when the REMOTE/LOCAL
switch has been set to LOCAL.