Filter
Top Products
– 65 –
Setup menus
SYSTEM menu
<SYSTEM>
Item Setting
No.
Superimposed
No.
Superimposed
Description
display display
00 WFM SEL 0000 CTL
0001 TC
0002 VIDEO
0003 SYNC
0004 RF-L
0005 RF-R
0006 ENV-L
0007 ENV-R
05 ENCODER 0000 REMOTE
SEL 0001 LOCAL
0002 BOTH
06 V LEVEL 0000 HD
CTRL 0001 SD
0002 BOTH
The underline on the setting item denotes the initial setting.
Video output signal adjustments
A control matrix of the adjustments is shown below.
Ext. encoder remote: Ext. encoder remote adjustment only.
Unit: Setup menu adjustment only.
Ext. encoder remote/Unit: Simultaneous adjustment from external encoder remote and setup menu is possible
but the result of adjustment from external encoder remote will not be reflected in the
setup menu.
This selects the signal to output from the VIDEO OUT 2
connector.
0: The CTL signal is output.
1: The TIME CODE signal is output.
2: The VIDEO OUT signal is output.
3: The SYNC signal is output.
4: The PB L RF signal is output.
5: The PB R RF signal is output.
6: The PB L ENV signal is output.
7: The PB R ENV signal is output.
<Note>
1. The settings can be changed at any time regardless of the
setup menu item No. 30 (MENU LOCK) setting.
2. The signals which are output during normal playback have
approximately the levels given below.
CTL: 0.1 to 0.3 Vp-p TC: 0.6 Vp-p
VIDEO: 1.0 Vp-p
This selects whether the video output signal is to be adjusted
on the VTR or with the external encoder remote control.
0: Video output signals are adjusted with the external encoder
remote control.
1: Video output signals are adjusted on the VTR.
2: Each adjustment of video output signal is made from the
encoder remote controller of this unit and external
equipment.
The output levels can be selected when adjusting video output
levels from external encoder remote controller.
0: HD video output level can be selected.
1: SD video output level can be selected.
2: HD/SD video output levels can be selected.
<Note>
When the external
encoder remote controller
(AJ-ER50, option) is
used, VIDEO PHASE
and SYS PHASE of the
encoder remote controller
will not operate.
05: ENCODER SEL
REMOTE
LOCAL
BOTH
06: V LEVEL CTRL
HD
SD
BOTH
HD
SD
BOTH
HD
SD
BOTH
650: Y LVL (HD)
651: P
B LVL (HD)
652: PR LVL (HD)
653: BK LVL (HD)
External encoder remote controller
Not adjustable
Ext. encoder remote controller
Unit
Ext. encoder remote controller/Unit
Unit
Ext. encoder remote controller/Unit
654: Y LVL (SD)
655: P
B LVL (SD)
656: PR LVL (SD)
657: BK LVL (SD)
Not adjustable
External encoder remote controller
External encoder remote controller
Unit
Unit
Ext. encoder remote controller/Unit
Ext. encoder remote controller/Unit
Settings Item adjusted