Filter
Top Products
– 66 –
Setup menus
SYSTEM menu
<SYSTEM> (continued)
Item Setting
No.
Superimposed
No.
Superimposed
Description
display display
12 SYS H 0550 –550
(HD)*1 : :
1100 0
::
1650 550
13 V PHASE 0000 –500
(HD)*1 : :
0500 0
::
1000 500
14 SYS SC 0000 –108
(SD)*
2
::
0108 0
::
0216 108
15 VO SYS 0000 –429
H (SD)*
2
::
0429 0
::
0858 429
16 SDI SYS 0000 –429
H (SD)*
2
::
0429 0
::
0858 429
17 V PHASE 0000 –190
(SD)*
2
::
0190 0
::
0380 190
18 SCH COAR 0000 0
(SD)*
2
0001 90
0002 180
0003 270
19 SCH FINE 0000 –32
(SD)*
2
::
0032 0
::
0064 32
The underline on the setting item denotes the initial setting.
*
1
: With the HD output (HD tape playback or up-conversion output)
*
2
: With the SD output (SD tape playback or down-conversion output)
This enables the system phase to be adjusted in 27ns steps.
–: The phase is advanced.
+: The phase is delayed.
<Note>
If setting
operation is performed, the setting value does not
return to factory (default) setting.
This enables the video system phase to be adjusted in 27ns
steps.
–: The phase is advanced.
+: The phase is delayed.
<Note>
In the case of the HD up-converter output from the SD
playback tape (when the option has been installed), the video
phase is fixed.
This enables the system phase to be adjusted in a total
variable range of +/–180 degrees or more.
–: The phase is advanced.
+: The phase is delayed.
<Note>
If setting
operation is performed, the setting value does not
return to factory (default) setting.
This enables the video out system phase to be adjusted in
74ns steps.
–: The phase is advanced.
+: The phase is delayed.
<Note>
If setting
operation is performed, the setting value does not
return to factory (default) setting.
This enables the SDI OUT system phase to be adjusted in
74ns steps.
–: The phase is advanced.
+: The phase is delayed.
<Note>
If setting
operation is performed, the setting value does not
return to factory (default) setting.
This enables the video system phase to be adjusted in 148ns
steps.
–: The phase is advanced.
+: The phase is delayed.
<Note>
In the case of the SD down-converter output from the HD
playback tape (when the option has been installed), the video
phase is fixed.
This enables the SCH phase to be adjusted in 90-degree
steps.
–: The phase is advanced.
+: The phase is delayed.
(The SC phase changes but the H phase remains
unchanged.)
This enables the SCH phase to be adjusted in a total variable
range of +/–45 degrees or more.
–: The phase is advanced.
+: The phase is delayed.
(The SC phase changes but the H phase remains
unchanged.)