Filter
Top Products
– 19 –
Operations using the front panel bottom controls
The desired status information and setup menu items can registered in the STATUS 1 to 3
buttons b and PROG MENU 1 to 4 buttons c by using the SETUP, STATUS, PROG MENU
and SAVE/EXIT buttons a. Once the information has been registered, it can be indicated on
the VTR status display area 3 by pressing the STATUS 1 to 3 buttons b or PROG MENU 1
to 4 buttons c concerned.
Items which can be registered
The following items can be registered in the buttons.
•
STATUS: Up to 9 items including the recording format and playback format can be
registered in these buttons. (Refer to the VTR status item table for
descriptions of the items and contents.)
•
PROG MENU: Up to 9 items from setup menus in the 000 range to 700 range can be
registered in these buttons. However, the submenus of setup menu item
No.680 (BLANK LINE) cannot be registered.
Registration method
The items are registered as they are selected by the menu-driven system. Connect the TV
monitor to the VIDEO OUT3 connector in the unit’s connector area and display the
registration menu.
Press the SETUP button.
The message indicating that the registration steps can now be commenced appears on
the TV monitor.
Select the button which corresponds to the objective.
•
PROG MENU buttons:The registration menu for registering the setup menu items in
the PROG MENU 1 to 4 buttons is displayed.
•
STATUS buttons: The registration menu for registering the VTR status
information in the STATUS 1 to 3 buttons is displayed.
•
SETUP buttons: This cancels the registration operation.
SET UP
PROG
123
MENU
SAVE/
PROG MENU
MENU SET DIAG
EXIT
STATUS
STATUS
1234
b
a
c
MODE/SEL EXIT
1
2
-ASSIGNMENT MODE-
select any key!
MENU :<PROG MENU>
STATUS :<STATUS>
EXIT :<SETUP>