Filter
Top Products
– 74 –
Setup menus
USER menu
<OPERATION> (continued)
Item Setting
No.
Superimposed
No.
Superimposed
Description
display display
112 FRZ MODE 0000 DIS
SEL 0001 STBOFF
0002 SOF&EJ
113 REC INH 0000 OFF
0001 ON
114 REC INH 0000 LIGHT
LAMP 0001 FLASH
115 EJECT SW 0000 REC
INH 0001 OFF
116 EJECT LAMP 0000 MODE1
0001 MODE2
117 M CASSTT 0000 OFF
INH 0001 ON
118 SD MODE 0000 OFF
INH 0001 ON
The underline on the setting item denotes the initial setting.
This selects the output picture in the STANDBY OFF mode
established from the playback picture and the EJECT mode.
0: The video output is muted.
1: The picture being played back is frozen and output in the
STANDBY OFF mode only.
2: The picture being played back is frozen and output in the
STANDBY OFF mode and EJECT mode.
<Notes>
• The status when the picture is frozen complies with what has
been selected for the setup menu item No.604 (FREEZE
SEL) setting.
• In the EJECT mode, the frozen picture is output only when 1
(BLACK) or 2 (GRAY) has been selected as the setup menu
item No.106 (EJECT EE SEL) setting.
• When transferred to EJECT mode, FREEZE will be forcibly
cancelled in case of change in output format of HD serial
output.
This selects whether to allow or inhibit recording on the
cassette tape.
0: Recording on the tape is allowed when its accidental
erasure prevention tab has been set to the recording
enable position.
1: Recording on the tape is inhibited.
This selects whether to cause the REC INHIBIT lamp to flash
or light up when the cassette’s tab has been set to the
recording inhibit position.
0: The lamp lights.
1: The lamp flashes. (The lamp flashes at a frequency of
approximately once a second.)
<Note>
When “1” (ON) has been selected as the setup menu item
No.113 (REC INH) setting, the REC INHIBIT lamp lights all the
time regardless of this setting.
This selects whether to enable or disable the operation of the
eject button on the front panel.
0: The button’s operation is inhibited in the recording mode.
1: The button can be operated in any mode.
This selects whether EJECT lamp is kept lighting or turned off
in a state of cassette out.
0: EJECT lamp is kept lighting.
1: EJECT lamp is turned off.
It selects inhibit/permit of recording onto M cassette tape.
0: Recording onto M cassette tape is possible.
1: Recording onto M cassette tape is inhibited.
<Note>
With 0 (OFF) selected, the status of inhibit/permit of recording
onto cassette tape depends on the setting of setup menu
No.113 (REC INH).
This selects inhibit/permit of recording in DVCPRO50 and
DVCPRO format mode.
0: Recording onto cassette tape is possible.
1: Recording onto cassette tape is inhibited.
<Notes>
• With 0 (OFF) selected, the status of inhibit/permit of
recording onto cassette tape depends on the setting of setup
menu No.113 (REC INH).
• The recording format complies with the setup menu No.020
(SYS FORMAT) setting.