Filter
Top Products
65
RQTV0134
Play Page
Edit Page
VHS Picture Page
VHS Sound Page
VHS Recording, scheduled recording Page
VHS Play Page
Play fails to start even when
[1,PLAY] is pressed.
Play starts but then stops
immediately.
≥Insert the disc correctly with the label facing up.
≥The disc is dirty.
≥You tried to play a blank disc or a disc that is unplayable on the unit.
≥You tried to play a +RW that needs to be finalized on the equipment used for recording.
≥When recording to DVD-RAM using EP (8H) mode, play may not be possible on DVD players that
are compatible with DVD-RAM. In this case use EP (6H) mode.
≥You cannot play discs during DV automatic recording.
22
9
7
–
57
–
Audio and video momentarily
pause.
≥This occurs between playlist chapters.
≥This occurs as scenes change during Quick View.
–
30
DVD-Video is not played. ≥Some DVD-Video cannot be played when you change the ratings level. 56
Alternative sound track and
subtitles cannot be selected.
≥Multiple languages are not recorded on the disc.
≥You may have to use the disc’s own menus to select languages.
–
30
No subtitles. ≥When progressive output is on, closed captions cannot be displayed.
≥Subtitles are not recorded on the disc.
≥Set “Subtitle” in the Disc menu to “On”.
–
–
36
Angle cannot be changed. ≥This function depends on software availability. Angles can only be changed during scenes where
different angles are recorded.
–
You have forgotten your
ratings password.
≥With the tray open, keep pressing [¥, REC] and [1] on the main unit simultaneously for about 5 or
more seconds.
–
Quick View does not work. ≥This does not work when audio is other than Dolby Digital.
≥This does not work when recording is in XP or FR mode.
–
–
The resume play function
does not work.
≥Memorized positions are canceled when the unit is turned off or when the tray is opened.
The memorized position on the playlist is also canceled when the playlist and title are edited.
–
Cannot format. ≥The disc is dirty. Wipe with a damp cloth and then wipe dry.
≥You tried formatting a disc that is not compatible with the unit.
9
7
Cannot create chapters.
Cannot mark the start point
or the end point during
“Shorten Title” operation.
≥The unit writes the chapter division information to the disc when you turn it off or remove the disc.
The information is not written if there is an interruption in the power before this.
≥These operations are not possible with still pictures.
≥You cannot set points if they are too close to each other. You cannot set an end point before a start
point.
–
–
–
Cannot delete chapters. ≥When the chapter is too short to delete, use “Combine Chapters” to make the chapter longer. 40
The available recording time
doesn’t increase even after
deleting recordings on the
disc.
≥Available recording space on the DVD-R, the DVD-R DL, the +R or the +R DL does not increase
even after deleting previously recorded titles.
≥Available recording space on a DVD-RW (DVD-Video format) or +RW increases when the last
recorded title is deleted. (The recording space may increase slightly when other titles are deleted.)
–
–
Cannot create a playlist. ≥You cannot select all the chapters in a title at once as the source of playlist edition if the title also
includes still pictures. Select them individually.
–
OSD messages do not
appear.
≥Go to Setup and select “Automatic” in “Status Messages”.
Press [STATUS] to show the on-screen messages constantly.
35, 58
The blue back appears
during play.
≥You are playing a blank or poor quality part of the tape.
≥You can damage the unit if you play dirty or damaged tapes and this can cause the blue back to
appear. Consult your dealer.
–
–
Cannot hear the desired
audio type.
≥Press [AUDIO] to select the audio. 31
There is noise when playing a
video tape.
≥Adjust the tracking.
≥The tape is old or damaged.
35
–
“1” flashes when I try to
start recording.
Cannot record.
≥A video cassette is not inserted. Insert a video cassette with an accidental erasure prevention tab.
≥The erasure prevention tab has been removed. Cover the hole with adhesive tape.
22
10
Cannot record TV program. ≥The desired channel is not selected. Select the desired TV program. –
Cannot play. ≥Tapes recorded under a TV system other than NTSC (PAL, SECAM, etc.) cannot be played. –
The playback screen flickers. ≥The video head is dirty.
≥The tape is too old or damaged.
–
–
Troubleshooting guide
M6VP&PC.book 65 ページ ２００６年２月６日 月曜日 午後３時２０分