Panasonic KX-VC500 TV Cables User Manual


 
Amplifier/Active Speaker
Connection
This section describes how to connect an amplifier/
active speaker.
1. Connect the amplifier/active speaker to the Audio
Out L/R jack on the back of the KX-VC500 using a
stereo pin plug cable.
Note
Connect the amplifier/active speaker
correctly, as follows:
Left channel ® L
Right channel ® R
For more details about the amplifier or
active speaker, refer to the documentation
for the corresponding device.
Layout example:
Place the
speakers either side of the display, as follows:
Microphone
Main
video
camera
Display
Speaker
Speaker
Notice
Place the speakers either side of the display. If
you place the display at the front of the room
and the
speakers at the back, the microphone’s
left/right spatial direction may be reversed, and
the orientation of the image and sound will not
match on the other party’s side.
Connecting the Display with a
Component Cable
If your display does not have an HDMI terminal, use a
component cable for connection.
1. Connect the display to the Component terminal on
the back of the KX-VC500 using a component
cable.
Document Version 2010-10 Operating Manual 23
Preparation