Panasonic KX-VC500 TV Cables User Manual


 
3. Press [ ].
The next page is displayed.
4. Use [ ][ ] to select "Self Diag." and press
[Enter].
The self diagnosis screen is displayed with the
dialog box.
Note
You can hide or display the dialog box by
pressing [B].
Set the microphone at least 1 m (3.3 ft)
away from the speakers.
5. Press [R].
The self diagnosis starts.
Note
Check the image that is displayed from the
main video camera.
To
avoid
feedback, slowly raise the volume
using the remote control’s [+] button.
When someone speaks into the
microphone, confirm whether the sound
plays back through the speakers.
During self diagnosis, all Boundary
Microphones will be set to "Center
stereo".
During self diagnosis, the tone will be set to
"Standard".
6. Press [R].
The self diagnosis ends.
Note
If you do not press [R], the self diagnosis
will automatically end after about 10
minutes.
7. Press [Home].
The Home screen is displayed.
Performing Remote
Maintenance
The following operation is for performing remote
maintenance by your dealer. After performing the
operation, you cannot use the
KX-VC500 until remote
maintenance is finished. However, turning the power off
and then back on cancels remote maintenance, and you
can use the KX-VC500. For details, contact your dealer.
1. Press [Menu].
The Menu screen is displayed.
2. Use [ ][ ] to select "Settings" and press
[Enter].
The system settings screen is displayed.
3. Press [
] twice.
The third page is displayed.
4. Use [ ][ ] to select "Remote
access" and press
[Enter].
The dialog box to confirm the start of remote
maintenance is displayed.
5. Use [
][ ] to select "Yes" and press [Enter].
The remote maintenance screen is displayed.
70 Operating Manual Document Version 2010-10
Contacts and Settings