Panasonic KX-VC500 TV Cables User Manual


 
Making Remote Control
Settings
You can specify a remote control ID from 1, 2, or 3 for
both the remote control and the KX-VC500. The
KX-VC500
responds to signals from any remote control
with the same remote control ID as itself. If you do not
specify an ID, the KX-VC500 responds to signals from
all remote controls. You can confirm the remote control
ID for the KX-VC500 on the Home screen. (Page 25)
1. Press [Menu].
The Menu screen is displayed.
2. Use [
][ ] to select "Settings" and press
[Enter].
The system settings screen is displayed.
3. Press [
].
The next page is displayed.
4. Use [ ][ ] to select "Remote
Ctrl ID" and press
[Enter].
The remote control settings screen is displayed.
5. Use [ ][ ] to select the following items for input:
"Remote ID enable"
: Use [
][ ] to select
"ON" or "OFF" (default).
When "ON" is selected, you can set a specific
remote control ID for the KX-VC500.
When "OFF" is selected, the KX-VC500 will
respond to all remote controls.
"Remote control ID": Use [
][ ] to select a
remote control ID ("ID1" [default]/"ID2"/"ID3") for
the KX-VC500.
"Check ID mismatch": Use [ ][ ] to select
"ON" (default) or "OFF".
When "ON" is selected, if the KX-VC500
receives a signal from a remote control that has
an ID different from the one specified on the
Home screen, a warning is displayed. Follow
the procedures on the screen to change the
remote control ID.
When "OFF" is selected, even if the
KX-VC500 receives a signal from a remote
control that has an ID different from the one
specified, no warning is displayed on the Home
screen.
Note
If multiple remote controls with assigned
IDs are being used close together, it is
recommended that you select "OFF" for
"Check ID mismatch".
6. Press [G].
A dialog
box to confirm the saving of settings is
displayed.
7. Use [
][ ] to select "Yes" and press [Enter].
8. When "Remote ID enable" is set to
"ON" (Page 68):
The dialog box for changing the ID of the remote
control is displayed. Proceed to step 9.
Note
While the dialog box is displayed, video
conference calls cannot be received.
When "Remote ID enable" is set to
"OFF" (Page 68):
The system settings screen is displayed. Press
[Home] to return to the Home screen.
68 Operating Manual Document Version 2010-10
Contacts and Settings