Filter
Top Products
3. Use [ ][ ] to select "Standby Setting" and
press [Enter].
• The screen standby settings screen is
displayed.
4. Enter the length of time (0–99) in minutes until the
KX-VC500 enters screen standby mode (default:
10).
Note
• If you
set "0", the KX-VC500 does not enter
screen standby mode. However, if you
press the remote control’s [Video Out On/
Off] button, the KX-VC500 enters screen
standby mode even if "0" is set.
5. Press [G].
• A dialog box to confirm the saving of settings is
displayed.
6. Use [
][ ] to select "Yes" and press [Enter].
• The admin menu screen is displayed.
7. Press [Home].
• The Home screen is displayed.
Making Administrator
Password Settings
1. Login to the administrator menu. (
Page 71)
• The admin menu screen is displayed.
2. Press
[
].
• The next page is displayed.
3. Use [ ][ ] to select "Password Settings" and
press [Enter].
• The password settings screen is displayed.
4. Use [ ][ ] to select the following items and enter
a password (4–10 digits):
"Current password"
: Enter the current password
(default: 00000000).
"New password": Enter the new password.
"Retype new password": Enter the new password
again.
Note
• Please change the default login password
the first time the KX-VC500 is installed.
• Be sure to keep the password safe.
5. Press [G].
• A
dialog
box to confirm the changing of settings
is displayed.
6. Use [
][ ] to select "Yes" and press [Enter].
• The admin menu screen is displayed.
7. Press [Home].
• The Home screen is displayed.
Performing
System
Initialization
1. Login to the administrator menu. (Page 71)
• The admin menu screen is displayed.
2. Press [
].
• The next page is displayed.
Document Version 2010-10 Operating Manual 75
Contacts and Settings