Filter
Top Products
20
Display images from the cameras sequentially (sequential display)
It is possible to sequentially display images from cameras automatically. Images from the cameras will be displayed sequen-
tially according to the settings configured in advance.
The sequential display can be carried out on a single screen or a 4-split screen.
Sequential display on a single screen
z
Make sure that images are displayed not on a 4-split screen, and then press the [SEQUENCE] button.
• The sequential display will start and the icon (sequential display icon) will be displayed.
• To stop the sequential display, press the [SEQUENCE] button again.
Sequential display on a 4-split screen
z
Make sure that images are displayed on a 4-split screen, and then press the [SEQUENCE] button.
• The sequential display will start and the icon (sequential display icon) will be displayed.
• To stop the sequential display, press the [SEQUENCE] button again.
Notes:
• The dwell time (interval of switching from a camera channel to the next camera channel) can be configured on the setup
menu ("Display Setup" – "Sequence Dwell") (☞ page 61).
• It Is impossible to carry out the sequential display during playback.
• The sequence step that is unavailable to display (such as when no video signal) will be skipped.