Filter
Top Products
50
ALARM IN/CONTROL terminal
ALARM IN/CONTOROL
q!
3
@5
!
4
Alarm input CH1
Alarm input CH2
Alarm input CH3
Alarm input CH4
Alarm input CH5
Alarm input CH6
Alarm input CH7
Alarm input CH8
Alarm input CH9
Alarm input CH10
Alarm input CH11
Alarm input CH12
Alarm input CH13
Alarm input CH14
Alarm input CH15
Alarm input CH16
Time adjust input
Error output
HDD error output
(Signal GND)
(N.C.)
An event action will be taken according
to the setting.
An event action will be taken according
to the setting.
An event action will be taken according
to the setting.
An event action will be taken according
to the setting.
An event action will be taken according
to the setting.
An event action will be taken according
to the setting.
An event action will be taken according
to the setting.
An event action will be taken according
to the setting.
An event action will be taken according
to the setting.
An event action will be taken according
to the setting.
An event action will be taken according
to the setting.
An event action will be taken according
to the setting.
An event action will be taken according
to the setting.
An event action will be taken according
to the setting.
An event action will be taken according
to the setting.
An event action will be taken according
to the setting.
The clock of the recorder will be set to
00 (min) by signal input. (Time correc-
tion range: ±15 minutes)
Signal output upon an error detection
(Thermal error (47 °C {117°F} or high-
er), fan error, video loss, password
entry failure (3 times straight incorrect
password entry), no HDD detection)
Signal output upon a HDD error detec-
tion
Not available
Non-voltage make contact input, pulse
width: 100 ms or more
Non-voltage make contact input, pulse
width: 100 ms or more
Non-voltage make contact input, pulse
width: 100 ms or more
Non-voltage make contact input, pulse
width: 100 ms or more
Non-voltage make contact input, pulse
width: 100 ms or more
Non-voltage make contact input, pulse
width: 100 ms or more
Non-voltage make contact input, pulse
width: 100 ms or more
Non-voltage make contact input, pulse
width: 100 ms or more
Non-voltage make contact input, pulse
width: 100 ms or more
Non-voltage make contact input, pulse
width: 100 ms or more
Non-voltage make contact input, pulse
width: 100 ms or more
Non-voltage make contact input, pulse
width: 100 ms or more
Non-voltage make contact input, pulse
width: 100 ms or more
Non-voltage make contact input, pulse
width: 100 ms or more
Non-voltage make contact input, pulse
width: 100 ms or more
Non-voltage make contact input, pulse
width: 100 ms or more
Non-voltage make contact input, pulse
width: 100 ms or more
Open collector output, 100 mA or less,
24 V DC max.
Open collector output, 100 mA or less,
24 V DC max.
Pin No.
q
w
e
r
t
y
u
i
o
!0
!1
!2
!3
!4
!5
!6
!7
!8
!9
@0 - @4
@5
Signal Operation Remark