Filter
Top Products
22
Playback
Recorded images can be played as follows. Recorded images will be played on a single screen.
z
Select the desired camera channel by pressing the camera channel selection buttons (1 - 16) or by moving the
cursor onto the area respective to the desired camera channel using the arrows button (CDAB) when display-
ing images on a multi-screen.
x
Click the [PLAY] button.
• Recorded images will be displayed on a single screen. When playback starts, the icon (playback icon) will be dis-
played and the [PLAY] button will light.
• When selecting a multi-screen display during playback, recorded images will be displayed in the area of camera
channel 1. Live images will be displayed in the other areas.
Important:
• Playback of the latest recorded image using the selected camera channel will start.
It is impossible to play images currently being recorded.
• When the recording duration of recorded images to be played is too short, it may be impossible to play the recorded
images.
• When recorded images are played on this recorder, the recorded images currently being played cannot be played using a
PC via a network. Likewise, when recorded images are played using a PC via a network, the recorded images currently
being played cannot be played using the recorder.
Note:
When playing recorded images whose image quality and recording rate are low, audio may not be heard properly.
c
To stop playback, press the [STOP] button. When displaying recorded images on a multi-screen, press the
[STOP] button after selecting the area of camera channel 1.
• When the lit [PLAY] button goes off and the playback stops, the icon (playback icon) will also disappear.
Available functions when playing images
Fast forward playback/Fast reverse playback
When the [FWD] button is pressed during playback, fast forward playback will start.
When the [REV] button is pressed during playback, fast reverse playback will starts.
Each time the [FWD] button is pressed, playback speed will change as follows.
SLOW/1FF/2FF/3FF/4FF/5FF/6FF
Each time the [REV] button is pressed, playback speed will change as follows.
1REW/2REW/3REW/4REW/5REW/6REW
When the [PLAY] button is pressed during fast forward playback/fast reverse playback, playback speed will return to the nor-
mal playback speed.
Playback speed can be set on the setup menu ("Recording Setup" – "Common Setup" – "Advanced Setup" – "I Frame Interval")
(☞ page 56). The current playback speed will be displayed on the screen.
I Frame
Interval
1234
Playback
speed
SLOW ×1/2 ×1/2 ×1/2 ×1/2
1FF, 1REW ×1 ×2 ×3 ×4
2FF, 2REW ×2 ×4 ×6 ×8
3FF, 3REW ×4 ×8 ×12 ×16
4FF, 4REW ×8 ×16 ×24 ×32
5FF, 5REW ×16 ×32 ×48 ×64
6FF, 6REW ×32 ×64 ×96 ×128
The "I Frame Interval" setting is applied only for playback
images. The values in the table are approximate playback
speed as indications when the playback speed is normal
(x1).