Filter
Top Products
28
• Records alarm logs
Time and date or description of the event will be recorded as an alarm log at an event occurrence. Refer to page 68 for fur-
ther information about the alarm log.
• Starts recording automatically (Alarm recording)
Recording images from the camera to which an event occurred will start automatically at an event occurrence. Refer to
pages 59 and 60 for how to configure the settings for recording at an event occurrence (terminal/command alarm record-
ing/VMD alarm recording).
Depending on the event type, a different icon will be displayed as follows.
Terminal alarm input/Command alarm reception:
VMD (video motion detection):
• Starts recording of images before an event occurs (pre-alarm recording)
It is possible to start recording images several seconds before an event occurred automatically. Refer to page 58 for how
to configure the pre-event recording settings.
• Notification mail of an event occurrence
Notification mail of an event occurrence can be sent to the registered mail addresses. Refer to the operating instructions of
the monitoring software (PDF) on the provided CD-ROM for how to configure the settings.
• Provide notification of an event occurrence to the PC according to the setting of Panasonic alarm protocol
Notification of an event/error occurrence (time and date, event/error type) can be automatically provided to the PC accord-
ing to the settings of Panasonic alarm protocol.
Refer to the operating instructions of the monitoring software (PDF) on the provided CD-ROM for how to configure the set-
tings.
Note:
Even when an event occurred, the alarm action (including the alarm recording) will not be taken when "AL-M" or "AD-M" is
not selected for "Alarm Duration" of "Terminal" and "VMD". When "AD-M" is selected, the following alarm action will be taken.
• Move a Camera to the Preset Position
• Alarm recording
• Pre-alarm recording
• Archive the alarm log
Cancel the alarm action
The recorder will take the alarm action according to the settings when an event is detected. To cancel the alarm action, press
the [ALARM RESET] button.
Note:
When the setup menu is displayed or when being logging out, the alarm action will not be canceled even when the
[ALARM RESET] button is pressed.