Filter
Top Products
61
Configure the display settings [Display Setup]
■ Status Display
Determine which information is to be displayed.
All: All information will be displayed.
Status: The status icons and time and date will be dis-
played.
Name: The camera title and time and date will be dis-
played.
Play: Time and date of the recorded images currently
being played will be displayed.
Off: No information will be displayed.
Default: All
Note:
Error information will be displayed regardless of the set-
ting.
■ Sequence Dwell
Set the dwell time of the sequential display (interval of
switching from a camera channel to the next camera chan-
nel).
5 - 30 (sec)
Default: 5 (sec)
■ Camera Allocation Setup
Allocate the camera channels to the areas of multi-screen
(4/6/9). Move the cursor to the desired area of multi-screen
and determine the camera channel to be allocated to the
selected area using the camera selection buttons (1-10/0).
Default: As shown in the illustration above.
Important:
• The area allocated for camera channel 1 is impossible
to change.
• The same camera channel cannot be allocated to two
or more areas of the same multi-screen.
Display Setup
Status Display
All
Sequence Dwell
05 Sec
Camera Allocation Setup
Set
OK
Cancel
Camera Allocation Setup
4-screen A
01 02
03 04
6-screen A
04
02
01
05
03
06
9-screen
07
03
08
06
02
05
01
04
09
6-screen B
10
08
07
11
09
12
4-screen B
05 06
07 08
4-screen C
09 10
11 12
4-screen D
13 14
15 16
OK
Cancel