Filter
Top Products
41
Use an EIA-standard 19" rack (depth: 550 mm or more).
Note:
It is necessary to procure four optional rack mount screws (W2-MSS/5008 or M5 x12).
z
Remove the five rubber feet from the bottom of
the recorder using a flathead screwdriver.
x
Place the provided rack mounting brackets on
both sides of the recorder and tighten with the
eight provided screws.
c
Install the recorder with the rack mounting
brackets in the rack by using four rack mounting
screws.
Rack mounting
Remove the rubber feet.
Rack mount bracket fixing screw (provided)
Rack mount bracket (provided)
Rack mounting screw: M5 x12 (locally procured)
Important:
• Keep the temperature in the rack below +45 °C {113°F}.
• Install the recorder in the rack as low as possible, and make a space of 1 unit (44 mm, 1.73") between the recorder and the
other mounted appliances.
• Do not block the front side of the rack such as by attaching a door panel, etc.
• It is recommended to install cooling fans or equivalent equipment to keep the temperature in the rack below +30 °C {86°F}.