Filter
Top Products
ACCULINK 316x DSU/CSU
C-8 January 1997 3160-A2-GB21-50
Table C-2
(5 of 5)
Port Configuration Options
Far-end: Disab
Next Disab Maint Prev
Far-End Performance Statistics. Specifies whether to monitor for far-end performance report messages (PRMs) and
maintain far-end performance registers for a particular port.
Disab – Disables far-end performance statistics.
Maint – Monitors the port’s EDL for PRMs and maintains far-end performance statistics.
NOTE: This configuration option is only available on 2-port and 4-port DSU/CSUs.
NOTE: This configuration option is not available if EDL is disabled.
NOTE: If the local DSU/CSU is configured to maintain far-end performance statistics, then the remote device must be
configured to send near-end performance statistics.
Mgmt Link: Disab
Next Enab Disab Prev
EDL Management Link. Specifies whether the EDL management link is enabled for a particular port. Selecting Enab
allows SNMP or Telnet traffic to flow over the 4 kbps in-band data link provided by EDL.
Enab – Enables the port’s EDL management link.
Disab – Disables the port’s EDL management link.
NOTE: This configuration option is only available on 2-port and 4-port DSU/CSUs.
NOTE: This configuration option is not available if EDL is disabled or the FDL is enabled.
NOTE: If the local DSU/CSU’s EDL is enabled, then the remote device’s EDL must also be enabled.