Filter
Top Products
Async Terminal Operation
H-73160-A2-GB21-50 January 1997
Changing Configuration
Options
Use the Configuration branch of the main menu to
display or change DSU/CSU configuration options. Refer
to the Changing Configuration Options section in
Chapter 3, Operation, and Appendix C, Configuration
Options.
If the access level is not Level 1, the message “Access
level is 2, Configuration is read-only” is displayed on
line 24.
Displaying or Editing Configuration Options
To display or edit configuration options,
1. From the Main Menu screen, select
Configuration.
The Load Configuration From screen appears
(Figure H-5).
2. From the Load Configuration From screen, select
a configuration option set to load (Current,
Customer 1, Customer 2, Default Factory 1, or
Default Factory 2). You cannot edit the Default
Factory configuration options, but you can display
them.
main/config
Customer ID: Node A Model: 31xx
Slot: xx
LOAD CONFIGURATION FROM:
Current Configuration
Customer Configuration 1
Customer Configuration 2
Default Factory Configuration 1
Default Factory Configuration 2
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions, ESC for previous menu M
ainMenu Exit
Figure H-5. Configuration Load Screen