Filter
Top Products
ACCULINK 316x DSU/CSU
3-8 January 1997 3160-A2-GB21-50
NOTE
The following procedures are
examples only. Screen displays
may vary depending on the
model of the DSU/CSU.
Displaying Unit Identity
The identity of the DSU/CSU (serial number, model
number, software revision level, hardware revision level,
and customer identification) is available through the
Status branch of the front panel menu (see Appendix A,
Front Panel Menu).
The customer identification is the only identity number
you can change.
To display the DSU/CSU’s identity (ID),
1. From the top-level menu screen, select Stat.
F1
DSU ESF
Stat Test Cnfig
F2
F3
2. From the Status screen, press the key until the
ID selection appears on the screen.
3. Select ID.
F1
Status:
TStat LED ID
F2
F3
4. The following screens appear in the order listed
each time you press the
key.
F1
Identity:
Ser=
xxxxxxx
F2
F3
F1
Identity:
Mod=
xxxx
-
xx
-
xxx
F2
F3
F1
Identity:
Cust ID=
xxxxxxxx
F2
F3
F1
Identity:
SRev=
xx
.
xx
.
xx
F2
F3
F1
Identity:
CCA1=
xxxx
-
xxx
F2
F3
F1
Identity:
CCA2=
xxxx-xxx
F2
F3