Filter
Top Products
ACCULINK 316x DSU/CSU
Index-4 January 1997 3160-A2-GB21-50
MIBs, SNMP. See SNMP, MIBs
model numbers, I-1
modem, D
MODEM Port
acquiring/releasing the user interface, 3-35–3-36
configuration option, C-22
functional description, 1-2, 1-6
physical description, 1-5, 1-6
pin assignments, D-4
technical specifications, B-2
used with ASCII terminal/printer, 4-9
used with SNMP system, 3-14
Mon (Monitor) branch
example of use, 4-13
in the menu tree, A-1
N
NET (Network) Configuration branch
example of use, 3-12
in the menu tree, A-1
option table, C-9–C-10
option worksheet, C-37
network interface
cabling example, 2-8
channel allocation procedure, 3-21–3-26
configuration options, C-9
failure message, 4-2
front panel LED indications, 3-5
functional description, 1-6, 2-1
physical description, 1-5, 1-6
pin assignments, D-1–D-2
technical specifications, B-2
troubleshooting, 4-11
O
objects, SNMP, 1-2, E-1–E-20
OOF (Out Of Frame) condition
ASCII terminal/printer message, 4-9
Device Health and Status message, 4-3
front panel LED indication, 3-5, 3-6
Performance Report message, 4-7
troubleshooting, 4-11
options, strap. See configuration options
P
part numbers, I-1
pattern tests, 4-22–4-24
payload loopback (PLB), 4-18
PBX applications, 2-2
PDV (Pulse Density Violation) condition, 3-6
Perf (Performance Report) branch
example of use, 4-5–4-6
in the menu tree, A-1
performance reporting, 4-5–4-8, C-7, C-8
physical description of DSU/CSU, 1-3–1-5, B-2
pin assignments, D-1–D-16
Point-to-Point Protocol (PPP)
procedure for configuring, 3-16
used with SNMP system, 1-2, 2-3, 2-4, 3-14, F-1
PORT (1–4) interface
channel allocation procedure, 3-21–3-26
configuration options, C-4–C-8
failure message, 4-2
front panel LED indications, 3-7
functional description, 1-6, 2-1
managed by SNMP, E-1
physical description, 1-5, 1-6
pin assignments, D-8
technical specifications, B-2
Port Configuration branch
example of use, 3-13–3-14
in the menu tree, A-1
option table, C-4–C-8
option worksheet, C-39
power input
cabling example, 2-8
connector, 1-5, 1-6, D-16
consumption, B-1
optional power sources, 2-5–2-7, B-1, D-16
requirement, B-1
troubleshooting, 4-11
power module, 1-6, B-1
power-up self-test
displaying results, 4-2
front panel indications, 2-9, 3-5
troubleshooting, 4-11
problem determination. See troubleshooting
protocol, link layer, 3-14, 3-16–3-17
Ptrns (Test Patterns) branch
example of use, 4-22–4-24
in the menu tree, A-1
Q
QRSS Test, 4-22
R
rate
auxiliary port, C-24
communications port, C-21
external clock, C-15
synchronous data port, C-13
rear panel
connectors. See connectors, rear panel
physical description, 1-5–1-7
Rel (Release) branch
example of use, 3-36
in the menu tree, A-1
remote loopback, 4-15–4-16
repeater loopback (RLB), 4-19