Filter
Top Products
Operation
3-293160-A2-GB21-50 January 1997
Individual Channel Assignment Method
The Assign By configuration option screen appears
after you select a port.
To assign by the individual channel method,
1. Press the
key once to bring the Chan selection
onto the screen.
F1
Assign By:Block
Next Block ACAMI
F2
F3
2. Press F3 (Chan).
F1
Assign By:Chan
Block ACAMI Chan
F2
F3
3. Press F1 (Next) to display the next configuration
option (channel allocation).
4. Line 1 displays the 24 channels for the network
interface or the DTE Drop/Insert (DSX-1)
interface, depending on which destination was
chosen. This example assumes that the network is
the destination. Line 2 displays what is allocated
to the DS0 channel shown in Line 1. Pressing the
or key scrolls the channels onto the screen
in groups of three. Select the channel by pressing
the Function key under the desired number. Portn
appears. The port is assigned to that channel. To
deallocate a port, press the Function key under
that port number. Pressing the Function key under
channels assigned to other ports has no effect.
F1
N1 N2
Next Prt1 Prt2
F2
F3
Allocating DS0 Channels from the DTE
Drop/Insert Interface to the Network
Interface
By using the configuration options, you can allocate
DS0 channels from the DTE Drop/Insert (DSX-1)
interface to the network interface and specify which DS0
channels carry Robbed Bit Signaling (RBS) information
for voice channels.
To allocate DS0 channels from the DTE Drop/Insert
(DSX-1) interface to the network interface,
1. From the top-level menu screen, select Cnfig.
2. Select the configuration option set to be copied
into the Edit area by using the appropriate
Function key. Use the scroll keys, if necessary.
3. Select Edit.
4. From the Edit screen, press the
key until the
Chan selection appears on the screen.
5. Select Chan.
F1
Edit:
Port NET Chan
F2
F3
6. From the Channel Config screen, select DTE.
F1
Channel Config:
Dsply Clear DTE
F2
F3