Filter
Top Products
Configuration Options
C-313160-A2-GB21-50 January 1997
Table C-9
(4 of 7)
General Management Configuration Options
Com IP Adr:
Next Edit Clear Prev
Com Port IP Address. Specifies the IP address for the communication port if the Com Use configuration option is set to
Mgmt or Daisy.
Edit – Allows you to edit or display the IP address for the communication port.
Clear – Allows you to clear the IP address for the communication port. The IP address is set to 000.000.000.000.
NOTE: This configuration option is not available on carrier-mounted DSU/CSUs if the communication port is disabled.
Com NetMask:
Next Edit Clear Prev
Subnet Mask for the Communication Port. Specifies the subnet mask for the communication port if the Com Use
configuration option is set to Mgmt or Daisy.
Edit – Allows you to edit and/or display the subnet mask for the communication port.
Clear – Allows you to clear the subnet mask for the communication port. The subnet mask is set to 000.000.000.000. If
the subnet mask is 000.000.000.000, the IP protocol creates a default subnet mask based on the class of the IP address
(Class A: 255.000.000.000, Class B: 255.255.000.000, or Class C: 255.255.255.000).
NOTE: This configuration option is not available on carrier-mounted DSU/CSUs if the communication port is disabled.
Com Link: PPP
Next PPP SLIP Prev
Com Port Link Layer Protocol. Specifies the link layer protocol for the communication port if the Com Use configuration
option is set to Mgmt or Daisy.
PPP – Specifies PPP as the link layer protocol for the IP management link on the communication port.
SLIP – Specifies SLIP as the link layer protocol for the IP management link on the communication port. The
communication port must be configured for asynchronous operation to support SLIP. This selection does not appear if the
Com Use configuration option is set to Daisy.
NOTE: This configuration option is not available on carrier-mounted DSU/CSUs if the communication port is disabled.
Modem IP Adr:
Next Edit Clear Prev
Modem Port IP Address. Specifies the IP address for the modem port if the Modem Use configuration option is set to
Mgmt.
Edit – Allows you to edit or display the IP address for the modem port.
Clear – Allows you to clear the IP address for the modem port. The IP address is set to 000.000.000.000.
NOTE: This configuration option is available on standalone DSU/CSUs only.
F