Filter
Top Products
ACCULINK 316x DSU/CSU
3-18 January 1997 3160-A2-GB21-50
8. Press F2 (Edit) to edit the community name.
F1
CommunityName1:
Next Edit Clear
F2
F3
NOTE
Steps 9 and 10 describe the
process for entering text strings
for Mgmt configuration options.
This process applies to entering
any text strings into Mgmt
configuration options.
9. Use the and keys to position the cursor
under the character you want to change. Press
F1 (Up) or F2 (Down) to scroll through the valid
numbers/characters for the text string.
F1
public
Up Down Save
F2
F3
The F1 (Up) key scrolls through the ASCII
character set in the following order: numbers
(0–9), lowercase letters (a–z), uppercase letters
(A–Z), space character, ASCII symbols (ascending
order, based on ASCII code), and the End of Line
symbol (←). The ← erases all characters to the
right of the cursor.
10. When you are through changing the community
name, you must press F3 (Save) to save the value.
Otherwise, the original value will be retained.
11. Press F1 (Next) until the Access 1 configuration
option appears.
12. Press F2 (Read) or F3 (R/W).
F1
Access 1:
Next Read R/W
F2
F3
The Read selection allows read-only access
(SNMP “Get”) to the accessible objects in the
MIB when community name 1 is used. The R/W
selection allows Read/Write access (SNMP “Get”
and “Set”) to the objects in the MIB. Write access
is allowed for all objects specified as read/write in
the MIB. Read access is allowed for all objects
specified as read-only or read/write.