ACCULINK 316x DSU/CSU
3-2 January 1997 3160-A2-GB21-50
Overview
This chapter contains information for operating your
DSU/CSU. It includes a description of the front panel and
sample procedures for configuring the DSU/CSU.
NOTE
Additional information for the
carrier-mounted DSU/CSU is
located in the
ACCULINK 3151
CSU and 3161 DSU/CSU General
Information Guide
and the
COMSPHERE 3000 Series
Carrier Installation Manual
.
Using the Front Panel
The standalone DSU/CSU front panel (Figure 3-1)
consists of an LCD, a keypad, test jacks, and 12 LEDs.
The carrier-mounted DSU/CSU faceplate contains test
jacks and 12 LEDs, however, the LCD and keypad are
located on the Shared Diagnostic Control Panel (SDCP)
of the 3000 Series Carrier. For more information about the
SDCP, refer to the COMSPHERE 3000 Series Carrier
Installation Manual.
NOTE
You can display a graphical
representation of the DSU/CSU
front panel on an attached PC
(see Appendix G,
Front Panel
Emulation
).
F1 F2 F3
OK
FAIL TEST SIG OOF ALRM
NETWORK RXD
EER SIG ALRM PDVOOF BPV
LCD
3160
ACCULINK
In
Out
In
Out
In
Out
NET
MON EQPT
DTR TXD CTS RTS
496-1493
6
Figure 3-1. Standalone DSU/CSU Front Panel