Filter
Top Products
ACCULINK 316x DSU/CSU
3-30 January 1997 3160-A2-GB21-50
7. From the DTE Channels screen, press F1 to select
Assign.
F1
DTE Channels:
Assign Voice
F2
F3
8. Press the Function key below the network channel
desired. Each time that you press the Function key,
the DTE channel number will scroll up one
number. If the network channel is currently
unassigned (‘‘–” is displayed on Line 2), the DTE
channel number initially displays the same number
as the corresponding network channel number.
However, if the network channel is currently
assigned, the DTE channel number is shown as
Dn. Pressing the Function key for D24 wraps the
display back to D1. Only those channels that are
not already assigned will appear on the LCD when
scrolling. The network channels assigned to ports
(Prt1...Prt4) are unavailable for assignment.
F1
N1 N2 N3
D1 D2 –
F2
F3
To specify DTE Drop/Insert (DSX-1) channels used to
carry voice information,
1. Press from the channel allocation screen to
return to the DTE Channels screen.
F1
N1 N2 N3
D1 D2 –
F2
F3
2. From the DTE Channels screen, press F2 to select
Voice.
F1
DTE Channels:
Assign Voice
F2
F3
3. Line 1 displays the 24 DS0 channels for the DTE
Drop/Insert (DSX-1) interface. Pressing the
or
key scrolls the channels onto the screen in
groups of three. Line 2 displays whether the DS0
channel in Line 1 is a data channel (Data) or a
voice (RBS) channel. Each time that you press the
Function key located below the desired channel,
the display in Line 2 toggles between Data and
RBS.
F1
D1 D2 D3
RBS RBS RBS
F2
F3