12 C2908M-B (4/05)
Typical Applications
There are two ways to make a high performance multimedia transmission system for Ethernet networks:
• One way is to use just the transmitter and connect it through the Ethernet network to a PC with a web browser at the receiving end.
• Another way is to connect the transmitter through the Ethernet network to a receiver. This is often called a box-to-box connection because
it uses two PelcoNet NET300 transmission system units.
In either case, routing dedicated cables from a camera to a monitor is not required because you can use the existing Ethernet network for that
purpose.
Refer to figures 3 through 16 for examples of these configurations. Refer to Appendix A for detailed illustrations.
Figure 3.
Configuration for Box-To-Box Connections
RS232/422/485
Video In
RS232/422/485
Video Out
MONITOR
LAN/WAN
TCP/IP
INTRANET/INTERNET
TRANSMITTER
RECEIVER
CAMERA